15 notices from official UK procurement sources · last import 22 Aug 2026
Newry, Mourne and Down District Council (NMD) · British Oversea Territories; Channel Islands; Europe; Isle of Man; Rest of the World; United Kingdom
Applications are invited from Contractors, under the terms of the NEC4 ECSC Short Contract, for PEACEPLUS Project: Schomberg Society Kilkeel - Upgrade & refurbishment Works: A combination of mechanical and electrical upgrades, and general refurbishment activities across multiple areas of an existing operational community facility. The works will be for Working in Occupied Premises - 45211000-9, General Construction Work - 45210000-2, Refurbishment over 15K - 45453100-8, Washroom Systems - 45330000-9, for a period of 6 weeks and will commence not before Late September 2026. To access this competition: Registered: Login to https://suppliers.multiquote.com and view the opportunity CA18360. Not registered: Visit https://suppliers.multiquote.com then register and quote CA18360 as the reason for registration. Any queries please contact MultiQuote on 020 3920 8054.
KBS Maritime Ltd · British Oversea Territories; Channel Islands; Europe; Isle of Man; Rest of the World; United Kingdom
High level summary of the project includes: Undertaken roof repair as there are leaks throughout. Installation of roof insulation and suspended ceiling. Upgrade of all glazing and doors (including fire doors). Strip out of existing M&E services/plant. Installation of VRV/VRF system and ASHP. Upgrade of all lighting and ensuring complete electrical installation is ATEX/DSEAR compliant. Note, a Stage 3 design and report will be provided and we would expect a stage 4 design/report before we progress with the build stage.
Dumfries and Galloway Council · Scotland
This opportunity is for a Measured Term Contract for Periodic Fixed Electrical Inspections within Council properties throughout Dumfries and Galloway. This contract will provide Dumfries and Galloway Council with an appropriately certified and qualified Contractor to ensure compliance at all times.
Ministry of Defence · West Midlands
(EP0060) Replace the asbestos wall and roof cement cladding with corrugated galvanised steel sheeting, Episkopi, Cyprus The scope of works includes a range of structural alterations, demolition works and new installations throughout the building. The demolition and alteration works include the safe removal of asbestos-containing materials, including roof sheets, canopies, wall cladding and ceiling debris, which will be carried out by a licensed contractor. Removals include internal timber coverings, partitions, doors and windows, and regarding the roof all the purlins, timber rafters and roof trusses with one exception. A new roof will be supplied and installed including steel trusses, bracings, SHS beams, Z-purlins and RHS girts for supporting the false ceiling. The roof and the walls will be cladded with rockwool insulated panels and a suspended plasterboard ceiling will be installed. The works further include the erection of a blockwall, capping beams, installation of aluminium doors and windows, an electrically operated roller shutter, uPVC gutters and rainwater downpipes, together with internal and external decoration. The scope also allows for the required mechanical removals and associated electrical works. The Provisional Key Tender dates for the project are as follows: - Expression of interest return: 31/08/2026 - Invitation to Tender: 10/09/2026 - Tender Return Date: 16/10/2026 - Contract award: 11/01/2027 - Commencement of work: 01/02/2027 - Completion of work: 15/09/2027 Work commencement and completion dates will be subject to MOD DIO's agreement, as they will be dictated by the Operating Authority to avoid Operational Restrictions. The currency of this project is Euro (€). The location of this project is Cyprus (British Forces, Episkopi). Additional information: Any company wishing to participate in this tender should complete the Pre-Qualification Questionnaire (PQQ) and the EOI form which are attached and return them electronically to the above email address by no later than 12:00 EET on 31/08/2026. For companies that have submitted a PQQ within the last 12 months, there is no requirement to re-submit it. They must provide the details of their last PQQ submission to guarantee inclusion on the invitation list.
Civil Nuclear Police Authority (CNPA) / Civil Nuclear Constabulary (CNC) · North West
Provision of Electrical & Mechanical Consultancy Services for Generator Infrastructure
London Borough of Croydon · London
The Authority intends to award a single contract for the provision of PMI Electrical Services for a term of one hundred and twenty (120) months (10 years). The Contract will include a twelve (12) month no‑fault break clause, exercisable at the Authority’s discretion. The indicative total contract value is £75,000,000 (Seventy‑Five Million Pounds), which equates to an estimated £7.5 million per annum, subject to demand and a zero‑volume guarantee. This contract covers the full scope of electrical cyclical testing, maintenance, servicing, associated remedial works, upgrades and compliance activities across residential properties and communal buildings.
Hertford Town Council · North East England; North West England; Yorkshire and the Humber; East Midlands; West Midlands; East of England; London; South East England; South West England
Service delivery: - Secure and appropriate storage of all HTC Festive Lights assets - Installation and removal of lighting - Structural testing including pull testing - Electrical Testing including testing of lighting and power supply locations - Repairs and maintenance of infrastructure and power supplies - Provision of all necessary paperwork including insurances & RAMS - Provision of assistance to secure a Festive Lighting Licence with Hertfordshire County Council - Year-round maintenance of HTC Festive Lights assets - 24-hour contact for urgent repairs and emergencies - Emergency call out time within a 4-hour period of notification - Attendance at the annual festive light switch on which takes place in November. Asset list and installation requirements: 9 x Crossroads using 6mm catenary wire attached with specially designed anchor plates, to be tested yearly by a CFA registered company, installed to above regulation height of 5.6m. Made up of 5 x Crossroad displays 5m x 1.2m and 4 x Crossroad displays 8m x 1.2m. 9 x feature trees to have 30 x 10m sets of warm white / white twinkle 24v SELV with 100 LED lights per set, to be installed along the branches (these are not to be wrapped around branches) using specially designed expandable rubber band straps. 1 Christmas Tree to be decorated using 30 x 10m sets of warm white 24v SELV with 100 LED lights per set, a mix of colour, shape and sized metal stags, including matching baubles and metal plates for fencing. 36 x Column wraps using 2 x 10m sets 240v, 100 LED lights per set installed above regulation height of 2.5m. 70 x metal stag heads to be installed at a set height throughout the town to each lit column. Set pieces: 2 x set pieces to be 24v Selv fed from above regulation height of 2.5m by 230v supply (only SELV cable below 2.5m), these set pieces need to be anchor bolted to floor and to be tested yearly by a CFA registered company using specialist testing equipment. Contractor should be familiar with applying for Licenses with County Authorities and have all the necessary paperwork for Insurances, RAMS, etc. The contract will be for a 3-year term to commence on 1st August 2027. Evidence of suitable, secure storage of the Festive Lights required. Contractors to provide a 24 hour call out service. Attendance on the scene within 4 hours for any emergencies. Tender documentation should include a full breakdown of charges including emergency call out fees. A statement regarding the environmental sustainability commitments of your company in relation to this contract and evidence that the company is HERS and CFA registered. ALL engineers are skilled in their job roles and have the right equipment and tools to work safely. Other Information: References. Please supply contact details of at least one relevant authority where you have undertaken this work previously. Your tender document must be returned by midday, 4th September 2026 via email to: steve.catherall@hertford.gov.uk
Hertford Town Council · England
Service delivery: - Secure and appropriate storage of all HTC Festive Lights assets - Installation and removal of lighting - Structural testing including pull testing - Electrical Testing including testing of lighting and power supply locations - Repairs and maintenance of infrastructure and power supplies - Provision of all necessary paperwork including insurances & RAMS - Provision of assistance to secure a Festive Lighting Licence with Hertfordshire County Council - Year-round maintenance of HTC Festive Lights assets - 24-hour contact for urgent repairs and emergencies - Emergency call out time within a 4-hour period of notification - Attendance at the annual festive light switch on which takes place in November. Asset list and installation requirements: 9 x Crossroads using 6mm catenary wire attached with specially designed anchor plates, to be tested yearly by a CFA registered company, installed to above regulation height of 5.6m. Made up of 5 x Crossroad displays 5m x 1.2m and 4 x Crossroad displays 8m x 1.2m. 9 x feature trees to have 30 x 10m sets of warm white / white twinkle 24v SELV with 100 LED lights per set, to be installed along the branches (these are not to be wrapped around branches) using specially designed expandable rubber band straps. 1 Christmas Tree to be decorated using 30 x 10m sets of warm white 24v SELV with 100 LED lights per set, a mix of colour, shape and sized metal stags, including matching baubles and metal plates for fencing. 36 x Column wraps using 2 x 10m sets 240v, 100 LED lights per set installed above regulation height of 2.5m. 70 x metal stag heads to be installed at a set height throughout the town to each lit column. Set pieces: 2 x set pieces to be 24v Selv fed from above regulation height of 2.5m by 230v supply (only SELV cable below 2.5m), these set pieces need to be anchor bolted to floor and to be tested yearly by a CFA registered company using specialist testing equipment. Contractor should be familiar with applying for Licenses with County Authorities and have all the necessary paperwork for Insurances, RAMS, etc. The contract will be for a 3-year term to commence on 1st August 2027. Evidence of suitable, secure storage of the Festive Lights required. Contractors to provide a 24 hour call out service. Attendance on the scene within 4 hours for any emergencies. Tender documentation should include a full breakdown of charges including emergency call out fees. A statement regarding the environmental sustainability commitments of your company in relation to this contract and evidence that the company is HERS and CFA registered. ALL engineers are skilled in their job roles and have the right equipment and tools to work safely. Other Information: References. Please supply contact details of at least one relevant authority where you have undertaken this work previously. Your tender document must be returned by midday, 4th September 2026 via email to: steve.catherall@hertford.gov.uk
Epsom & St Helier University Hospitals NHS Trust · British Oversea Territories; Channel Islands; Europe; Isle of Man; Rest of the World; United Kingdom
Epsom and St Helier University Hospitals NHS Trust is seeking competitive tenders from suitably qualified and experienced electrical contractors for the design and replacement of existing electrical distribution board SP-3-3-21, located within the A Block Lower Basement Plant Room at St Helier Hospital. The works comprise the provision of a complete, fully compliant and operational electrical distribution installation and shall include, but not be limited to: Detailed surveys, investigations, circuit tracing and verification of the existing electrical installation. Load monitoring and confirmation of existing and proposed electrical demand. Detailed electrical design, calculations and coordination with the existing hospital electrical infrastructure. Discrimination and protection coordination studies. Supply and installation of a new Form 4 compartmentalised panel board, nominally rated at 250A, subject to Contractor design verification. Provision of a new outgoing protective device from PB-2-1 and all associated modifications. Installation of approximately 50 metres of 120mm² 4-core XLPE/SWA/LSF submain cable, subject to final design and site verification. Provision of a separate CPC, subject to final design calculations. New cable containment, supports, brackets and associated infrastructure where required. CT metering enclosure and associated metering provisions. Cable termination chambers and associated accessories. Identification, isolation, disconnection, transfer, reconnection and testing of all retained outgoing circuits from SP-3-3-21. Removal and lawful disposal of the existing distribution board and redundant associated equipment. Earthing and bonding modifications. Builder's work, fire stopping and making good. Full inspection, testing, commissioning, operational proving and certification. Thermographic inspection following energisation. Record drawings, O&M documentation, asset information, training and handover. The works will be undertaken within a live operational acute hospital environment. Particular importance shall therefore be placed on continuity of electrical supplies and management of shutdown risk. The Contractor shall undertake a comprehensive Isolation Impact Assessment and develop detailed switching, shutdown, temporary-supply, contingency and rollback arrangements in conjunction with the Trust's Authorised Person (Electrical), Estates representatives and affected clinical/service stakeholders. Tenderers shall include for all temporary electrical supplies necessary to maintain critical and operational services, which may include temporary distribution boards, cabling, generators and/or UPS systems where identified through survey and detailed planning. Tenderers shall allow for shutdowns, circuit transfers and commissioning activities to be undertaken outside normal working hours, including nights and weekends, where required by the Trust to minimise disruption to clinical services. The Contractor shall provide all labour, management, supervision, plant, materials, temporary works, specialist attendance, design, testing and documentation required to deliver a complete installation in accordance with the tender specification, drawings, CDM Pre-Construction Information and associated Contract Documents. To access this competition: Registered: Login to https://suppliers.multiquote.com and view the opportunity CA18340. Not registered: Visit https://suppliers.multiquote.com then register and quote CA18340 as the reason for registration. Any queries please contact MultiQuote on 020 3920 8054.
ScotRail Trains Limited . · Scotland
ScotRail are tendering for suppliers for the provision of the Lease of high-performance industrial pressure washer systems suitable for cleaning railway rolling stock and depot infrastructure. The system will be installed outside the maintenance sheds, with small delivery stations with hoses inside the shed. The water will be supplied via fixed piping into the shed, the electrical connection will be supplied as well as concrete base for the machine to be sited. The supplier will be responsible for providing detail to attach to the pressure washer equipment. We require a quantity of 9 Pressure washers across 5 ScotRail depots.
Ministry of Defence · West Midlands
The scope of works includes the following: - Remove the stand-by generator and fuel tank from existing container and store for future use. - Remove and dispose of the existing container. - Construct the new shed at the original location and re-install the stand-by generator and fuel tank. - Provide a temporary generator to cover for emergency power while the works take place. - Overhaul generator fuel pumps and controls and installation of a client-furnished 5,000 litre fuel tank and all associated fuel line pipework, valves and accessories. - Carry out new electrical installation including cables to and from the automatic changeover switch, small power and lighting. - Supply and installation of new intake and discharge louvres, sound attenuators and motorised dampers. The Provisional Key Tender dates for the project are as follows: - Expression of interest: 14/08/2026 - Expression of interest return: 11/09/2026 - Invitation to Tender: 18/09/2026 - Tender Return Date: 30/10/2026 - Contract award: 19/02/2027 - Commencement of work: 05/03/2027 - Completion of work: 23/07/2027 The currency of this project is Euro (€). The location of this project is Akrotiri, Cyprus (British Forces). Additional information: Any company wishing to participate in this tender should complete the Pre-Qualification Questionnaire (PQQ) and the EOI form which are attached and return them electronically to the above email address by no later than 12:00 EET on 11/09/2026. For companies that have submitted a PQQ within the last 12 months, there is no requirement to re-submit it. They must provide the details of their last PQQ submission to guarantee inclusion on the invitation list. Pre-Qualification Questionnaire (PQQ) Expression of Interest form
Newry, Mourne and Down District Council (NMD) · British Oversea Territories; Channel Islands; Europe; Isle of Man; Rest of the World; United Kingdom
Applications are invited from Contractors, under the terms of the NEC4 ECSC Short Contract, for the following project: PP1020 St Monicas Boxing Club - Creation of extension to club facilities: creation of an extension for provision of toilet facilities, an office and kitchen accommodation including all associated electrical and fit out works. To access this competition: Registered: Login to https://suppliers.multiquote.com and view the opportunity CA18330. Not registered: Visit https://suppliers.multiquote.com then register and quote CA18330 as the reason for registration. Any queries please contact MultiQuote on 020 3920 8054.
Scottish Parliamentary Corporate Body · Scotland
The Scottish Parliamentary Corporate Body (SPCB) requires a Contractor to provide Building Maintenance Services. The service includes the planned and reactive maintenance of mechanical, electrical and building services together with fabric maintenance works and associated controls and equipment maintenance, at the Scottish Parliament Building, Holyrood, Edinburgh.
Newry, Mourne and Down District Council (NMD) · British Oversea Territories; Channel Islands; Europe; Isle of Man; Rest of the World; United Kingdom
Applications are invited from Contractors, under the terms of the NEC4 ECSC Short Contract, PEACEPLUS Project for: Ardglass parish church - Upgrade & refurbishment project: A combination of mechanical and electrical upgrades, and general refurbishment activities across multiple areas of an existing operational community facility. The works will be General Construction Work - 45210000-2, Refurbishment over 15K - 45453100-8, Washroom Systems - 45330000-9, Replacement of fire doors - 45421131-1, Installation of internal electrical services - 45310000-3, Internal wall insulation systems - 45321000-3, paving and asphalting works - 45233222-1, fencing installation work - 45340000-2, floor & wall coverings 45432111-5 , joinery second fix 45421000-4 for a period of 4 weeks and will commence not before Sept 2026. To access this competition: Registered: Login to https://suppliers.multiquote.com and view the opportunity CA18306. Not registered: Visit https://suppliers.multiquote.com then register and quote CA18306 as the reason for registration. Any queries please contact MultiQuote on 020 3920 8054.
Abingdon Town Council · England
Abingdon-on-Thames Town Council wishes to engage a contractor to undertake refurbishment of Abbey Hall, which includes the separation of the existing building into two independently functioning buildings: Abbey Hall and Guildhall. The project requires the disconnection, alteration, and installation of M&E services necessary to enable the operational separation of the two buildings, ensuring that each has independent building services while maintaining the integrity and functionality of the retained systems. The project comprises the modification and reconfiguration of the existing mechanical and electrical services within the Guildhall to facilitate the operational separation of the two buildings. The works include the removal of redundant services within the Guildhall, the disconnection and isolation of all interconnecting services between the Guildhall and Abbey Hall, the modification of retained services within the Guildhall, and the installation of new services to accommodate newly formed rooms and partitions. The scope of this contract is principally confined to the Guildhall. Works within Abbey Hall are limited to the safe disconnection and isolation of interconnecting services. The reinstatement or modification of retained services within Abbey Hall is excluded from this contract and will be undertaken by others. The Contractor shall provide a complete, fully operational installation, including all incidental and ancillary works necessary to achieve a compliant and functional system. The works shall be carried out in accordance with the project drawings and specifications, the JDP General Technical Specification for Mechanical and Electrical Services (Parts 3M and 3E), and all relevant statutory regulations, British Standards, and industry best practice. The Guildhall, together with Roysse's School and the Gateway at the west end of the Guildhall, forms part of a Grade II listed complex. Contractors shall ensure that no building services, fixings, supports, or ancillary installations are attached to, penetrate, or otherwise adversely affect the listed building fabric. The extent of the listed elements and any associated heritage constraints shall be verified on site prior to the commencement of works, and all activities shall be undertaken with due regard to the historic significance of the building and in accordance with any applicable conservation requirements.